Photos

Comments

• 

  Todd Churchill November 18, 2012 at 1:50am

  Yeah, my kickplate is painted 1/4" G1S plywood.  I guess that there is more than 1 way to skin a cat when it comes to the round corners.  I cut the 30 degrees sections that make up the 90 degree top and bottom rail from 1/2" plywood and build them up in three layers.
• 

  Christopher Lane November 16, 2012 at 6:54pm

  The rink is 24'x 38'

   
• 

  Christopher Lane November 16, 2012 at 6:53pm

  The kickplate is just 1/4" plywood painted yellow and put up after the liner is filled and I have established my water line.
• 

  Christopher Lane November 16, 2012 at 6:46pm

  Todd, I was on youtube and found a guy that did the corners in 18" sections it took 4-18"x 4' sections then the transititon from 4' to 2'. In all it was 5-18degree wedges driven into the joints to give me 90 degrees. I will get some pics of the backs but all it is are 2x4's boxed with 1/2" plywood.  Mark yes I do add a liner I just drape it over the walls and fill, once it freezes I have 6" kicker boards painted yellow that I attach and then trim the liner.  
• 

  Todd Churchill November 15, 2012 at 4:40am

  How did you make your corners?  Got any pics of them?
• 

  Mark V November 14, 2012 at 6:37pm

  Do you add a liner?  If so, how are you placing it, do you have a notch that it gets tucked into on the bottom, what?